-All of the rust on the car has been repaired/patched, the battery tray area, and holes in the floorpans have been fixed (rust cut out, 16g steel spot welded in and then fiberglassed/seam sealed around the edges to ensure a water tight seal). This is a project driver, not a concourse restoration, rust repairs were all done with new clean 16g steel but all are straight patches and were not made to look factory or be pretty as they are all hidden under the carpet or in the engine bay once the car is finished! Battery tray area was welded, patched, fiberglassed around the seams and then covered in heavy seam sealer, this will need to removed if you want to smooth it out, I didn't care because the battery will cover the majority of it up once installed. Please look at pictures closely.
-New xenon urethane front bumper and bumper delete plates.
-BRE 6 spoiler.
-JDM fender mirrors.
-Vogtland lowering springs and Stagg shocks/struts.
-Rear bumper mounting holes and mirror mounting holes have been shaved.
-Paint on exterior/jambs is decent but needs a wet sand/buff, interior and engine bay have not been finished yet. I didn't care too much about paint because I was building this as a driver so I didn't spend much money on it and it is not perfect. If your looking for a show quality paint job you'll need to repaint it!!. .but it looks good enough for a driver/track car as it sits in my opinion.
-Body is relatively straight but there are a few small dings, chips, etc. It is not perfect!
-New weatherstripping/seals on windshield, hatch, doors.
-Motor was pulled from a running salvaged 280z with 60k on it, turns over smoothly and looks good but I've never had it set up anywhere it could run so I have never fired it up. Odometer in the car reads 30,000
-240z oem wheels (tires are not good, I have one spare on the rear as one of the tires won't hold air, but all four 240z wheels are included).
-Comes with a ton of parts, please look at pictures carefully, I have most of what you'll need to finish it. Motor parts, A/C parts, brake parts, gas tank, partial interior as pictured (seats, dash, console, door panels, etc), whole car wiring, ecu, labeled nuts/bolts, etc, etc, etc. .but I do not have every single piece. The largest things I've noticed missing are the metal brake and fuel lines.
-extra tranny and head...head is in bad shape but could probably be used as a core.
-Clean TX title in my name so easy transfer for you.
All aftermarket parts are brand new. I can arrange shipping or deliver for free within a reasonable distance from Houston. This is a non-running project car and is sold AS-IS, no guarantees on anything. Please ask any and all questions prior to bidding! Thanks
|“This is a a non-running project car, motor is sitting in the engine bay but does not run as there is no wiring, gas tank, etc etc etc. This project needs to be finished, lots of parts are included but not everything you will need. Please look at all pictures and ask any question you have. Sold AS-IS!” |
| Year: || 1977 || VIN (Vehicle Identification Number): || HLS30411658 |
| Mileage: || 60,000 || Make: || Datsun |
| Vehicle Title: || Clear || Model: || Z-Series |